Ora 2 形象模型发布影片

请提供以下信息：我的产品名称、一句话产品介绍、我的Logo、3到6张产品截图、40张以上产品效果图（或照片）、我的品牌颜色和字体、ElevenLabs API密钥和语音ID，以及一段带有清晰过渡的免版税音乐（音频文件和过渡时间戳）。如果我省略了某些信息，请使用以下默认设置：“Ora 2”、“一个符合品味的图片模型”、来自Unsplash和Pixabay的免费图片、 Geist （墨水编号#111214）、eleven_v4上的Samara X语音（19STyYD15bswVz51nqLf）以及Pixabay的“Cascade Breathe”（129.83 BPM，过渡在75.39秒）。

<script>
请按以下格式撰写一段9行的旁白，并根据我的产品调整每一行：
这是[名称]。一个[类别]……专为[价值]而打造。[动词]支持任何风格。只需输入[输入]，它就能……理解。使用越多，它就越好用。调整它的[设置]。它的[设置]。它的[设置]。每一个[输出]——都如您所愿。[名称]。现已推出。
谨慎使用情感标签：在安静的句子中使用[softly]，在动词句中使用[excited]。不要在句首使用标签，句尾以句号结尾。
</script>

使用我的密钥直接调用 ElevenLabs API，无需MCP。一次性生成 4 个完整的脚本版本，让我选择。如果某句台词听起来不对劲，则将该台词重新生成 4 次，并将最佳版本拼接到我的版本中。
将超过 0.28 秒的停顿缩短至 0.2 秒，然后将每个短语的音量调整到中位数的 85%，仅在停顿期间调整增益。
对于单词计时，将朗读音频以 100 毫秒或更长的停顿处分割，使用 Whisper 分别转录每个片段，并将每个片段的首词与测得的起始点对齐。一次 Whisper 处理最多可以使单词延迟半秒。

一段 22 秒的方形发布影片，分辨率为 1440x1440，帧率为 60fps，风格类似于人工智能实验室的发布会：白色画布、一种字体、黑色墨水、真实图像，以及与说话时间完全同步逐字输入的字幕。
每个控件（提示栏、设置面板、标题栏）都使用了液态玻璃效果：先将控件背后的场景磨砂处理，然后像厚玻璃一样将场景沿边缘弯曲，最后添加顶部光泽、明亮的边缘和柔和的阴影。玻璃效果在纯白色背景上会消失，因此我会添加品牌色系的柔和光晕，或者将背景照片模糊处理。
其中一款突出了以我的品牌颜色渐变呈现的文字类型，并带有淡淡的光晕。
运动规则：保持镜头漂移（每场景的镜头移动幅度从 1.0 到 1.04 不等；当内容切换到下一场景时，从上一场景结束时的缩放级别开始）。不要让画面瞬间出现：使用至少 0.3 秒的缓动淡入淡出。以十六分音符为单位切换图像，每次切换都点击一下。场景切换应落在乐句开始时，并将音乐的插入点与 [动词] 线对齐。不要在屏幕上显示句号。
禁用：选择框高光、节拍扣杀、白光闪烁、3D、模板。

七个场景，与声音同步：

1.“这是[姓名]”：我的图片拼贴画随着姓名大字显示而逐渐淡出，然后过渡到类别行。
2.“专为[价值]而作”：我的最佳图像以十六分音符的形式全屏闪现，并在其上用白色文字写上一行。
3. 提示：玻璃提示条显示简短提示。结果卡片的样式每16个音符变换一次，同时，黑色样式的筹码会滚动到缩略图条上方的每个新名称。
4.“展示情绪板”：9 张图片飞入 3x3 的网格中，然后圈出结果，屏幕上会显示“它抓住了你”。
5.“用得越多，效果越好”：输入两行文字，强调的单词用渐变色表示。
6. 设置：显示一个带有三个滑块的玻璃面板，每个滑块都随着她的命名而移动。调整图像的色调，以十六分之一为间隔滚动新的种子，然后将其转换为海报。同步地在玻璃后面移动模糊的色彩晕染。
7. “每个[输出]都如你所见”：从玻璃标题框后的中心向外发射120张图片，然后在名称出现的同时将它们组合成我的徽标。在下方添加“立即输出”字样，并保持2秒。

将提示栏、结果和滑块替换为我的产品的实际输入、输出和设置。

设置歌曲，使高潮落在 [动词] 行上，并将节拍网格锚定在那里。
使用三段侧链（低频 30%，中频 85%，空气感 55%；保持 0.3 秒，前瞻 50 毫秒，释放 0.5 秒）将音乐降低到人声下方。然后调整每个乐句的中频，直到人声在 300 Hz 到 4 kHz 的频率范围内比音乐高出约 9 dB。
每个事件使用一个下载的 Mixkit 音效，并根据其峰值位置进行定位：每次图像切换时添加一个点击声，每次输入字母时添加一个按键音，强调词时添加一个柔和的落地音，以及在字幕和标志出现时添加呼啸声和冲击声。在每个音效的峰值附近进行修剪（许多上升音效为 4 秒）。在片尾卡下方，音乐沿着分贝曲线淡入淡出。响度设置为 -14 LUFS。

1. 一个HTML画布。每一帧都是 seek(t) 函数内部时间的纯函数，每个标题和剪切都遵循单词 table。
2. 玻璃：捕捉形状后面的画布，将其模糊约 14px 作为主体，在边缘 12px 的带状区域内绘制一个略微模糊的副本，放大约 1.06 倍，然后添加牛奶、光泽、边缘和阴影。
3. 使用Playwright以 60fps 的帧率渲染，使用 8 个运动模糊子帧，然后使用ffmpeg进行编码。
4. 在给我看任何东西之前，请制作一张静止图像的联系表，扫描帧差异以查找单帧跳帧（只有十六分音符的乐句可能会跳帧），并检查每个乐句的人声与音乐的比例。

热情洋溢的开场白听起来像是耳语，而兴奋的开场白则显得虚假。单词后面的高亮框看起来像是 Windows 的文本选择框。如果在交接过程中摄像头重置为 1.0，变焦会突然改变。0.05 秒的淡入淡出看起来像是瞬间弹出。

请告诉我您的想法，编写剧本，给我发4个配音版本供我选择，然后在最终渲染之前给我看8张静态图片。

Ask me for: my product name, a one-line pitch, my logo, 3 to 6 screenshots of the product, 40+ images of what it creates (or photos of it), my brand colors and font, an ElevenLabs API key and voice ID, plus a royalty-free track with a clear drop (the audio file and the drop timestamp). If I skip anything, use these defaults: "Ora 2", "an image model made for taste", free images from Unsplash and Pixabay, Geist, ink #111214, the voice Samara X (19STyYD15bswVz51nqLf) on eleven_v4, and Pixabay "Cascade Breathe" (129.83 BPM, drop at 75.39s).

<script>
Write a 9-line voiceover in this format and adapt every line to my product:
"This is [name]. A [category]... built for [value]. [Verb] in ANY style. Give it a [input] - and it just... understands. The more you use it, the BETTER it gets. Adjust its [setting]. Its [setting]. Its [setting]. Every [output] - exactly as you pictured it. [Name]. Out now."
Use emotion tags sparingly: [softly] on the quiet lines and [excited] on the [Verb] line. Don't tag the opener, and end it with a plain full stop.
</script>

Call the ElevenLabs API directly using my key, without an MCP. Generate 4 full-script takes in one pass and let me choose. If a line doesn't sound right, regenerate just that line 4 times and splice the best version into my take.
Shorten pauses longer than 0.28s to 0.2s, then bring each phrase 85% of the way toward the median level, adjusting gain only during pauses.
For word timings, split the read at pauses of 100ms or longer, transcribe each segment separately with Whisper, and align its first word to the measured onset. A single Whisper pass can place words up to half a second late.

A 22-second square launch film, 1440x1440 at 60fps, in the style of an AI lab launch: white canvas, one typeface, black ink, real images, and captions typed word by word at the exact time they're spoken.
Every control (prompt bar, settings panel, caption pill) uses liquid glass: frost the scene behind it, bend that scene along the edge like thick glass, then add a top sheen, bright rim and soft lift shadow. Glass disappears on plain white, so add a slow pastel aura in my brand colors or a blurred wash of the photo behind it.
The one emphasized word types in a gradient of my brand colors, with a faint glow behind it.
Motion rules: keep the camera drifting (push from 1.0 to 1.04 per scene; when content moves to the next scene, start at the zoom where the previous scene ended). Nothing appears instantly: use eased fades of at least 0.3s. Change images on 16th notes, with a click for each. Land scene changes on phrase starts, and align the music drop with the [Verb] line. Don't show full stops on screen.
Banned: selection-box highlights, beat-snapped slams, white flashes, 3D, templates.

Seven scenes, timed to the voice:

1. "This is [name]": a collage of my images drifts out as the name types in large, then gives way to the category line.
2. "made for [value]": full-screen flashes of my best images switch on 16th notes into the drop, with the line typed in white over them.
3. The drop: a glass prompt bar types a short prompt. The result card changes style every 16th note, while a black style chip rolls to each new name above a thumbnail strip.
4. "Show it a moodboard": 9 images fly into a 3x3 grid, then circle the result as "It gets you" types on screen.
5. "The more you use it, the better it gets": type two lines, with the emphasized word in the gradient.
6. The settings: show a glass panel with 3 sliders, each moving as she names it. Shift the image's hue, roll new seeds on 16ths, then turn it into a poster. Shift a blurred wash of its colors behind the glass in sync.
7. "Every [output], exactly how you see it": burst 120 of my images outward from the center behind a glass caption pill, then bring them together into my logo as the name types on. Put "Out now" underneath and hold for 2s.

Replace the prompt bar, results and sliders with my product's real input, outputs and settings.

Set the song so the drop lands on the [Verb] line, and anchor the beat grid there.
Duck the music under the voice with a 3-band sidechain (lows 30%, mids 85%, air 55%; 0.3s hold, 50ms look-ahead, 0.5s release). Then adjust the mids of each phrase until the voice sits about 9 dB above the music between 300 Hz and 4 kHz.
Use one downloaded Mixkit SFX per event, positioned by its measured peak: a click for each image change, a key sound for every typed letter, a soft landing on the emphasized word, whooshes, and impacts on the drop and logo. Trim each around its peak (many risers are 4 seconds). Fade the music along a dB curve under the end card. Loudnorm to -14 LUFS.

1. One HTML canvas. Every frame is a pure function of time inside seek(t), and every caption and cut follows the word table.
2. Glass: capture the canvas behind the shape, blur it about 14px for the body, draw a lightly blurred copy magnified about 1.06x in a 12px band along the edge, then add the milk, sheen, rim and shadow.
3. Render with Playwright at 60fps using 8 motion-blur subframes, then encode with ffmpeg.
4. Before showing me anything, make a contact sheet of stills, scan frame differences for single-frame pops (only the 16th-note runs may jump), and check the voice-to-music ratio for every phrase.

A [warmly] opener can sound whispered, while [excited] can feel fake. A highlight box behind a word looks like a Windows text selection. If the camera resets to 1.0 during a handoff, the zoom snaps. A 0.05s fade looks like an instant pop-in.

Ask me for the inputs, write the script, send me 4 voice takes to choose from, then show me 8 stills before the full render.

提示取自 邮政 @rossaxbt.